Координатно-измерительные машины HEXAGON серии DEA GLOBAL SILVER SF data sheet - страница 4

Предыдущая страница Следующая страница

Навигация

Specification

Specifications according to ISO 10360-2:2009, ISO 10360-5:2010 and ISO 10360-4:2000

Probe ConfigurationTemp 1erature Ran 8 ÷ 22 °CgeTemp 1erature R 6 ÷ 26 °CangeTemp 1erature R 5 ÷ 30 °Cange
E0,MPE/E150,MPEPFTU,MPEMPETHP/tE0,MPE/E150,MPEPFTU,MPEMPETHP/tE0,MPE/E150,MPEPFTU,MPEMPETHP/t
DEAGLOBAL Silver SF 09.xx.08
HP-S-X3C/X51.4 + L/3331.42.5/451.4 + L/2851.42.5/451.4 + L/2561.42.5/45
HH-A, HH-AS/HP-S-X1S, H1.4 + L/3331.42.5/451.4 + L/2851.42.5/451.4 + L/2561.42.5/45
HH-A, HH-AS/TP2001.9 + L/3331.9–1.9 + L/2851.9–1.9 + L/2561.9–
HH-A, HH-AS/HP-T, HP-TM2.1 + L/3332.0–2.1 + L/2852.0–2.1 + L/2562.0–
DEAGLOBAL Silver SF 12.xx.10
HP-S-X3C/X52.1 + L/3331.83.1/452.1 + L/2771.83.1/452.1 + L/2501.83.1/45
HH-A, HH-AS/HP-S-X1S, H2.1 + L/3331.83.1/452.1 + L/2771.83.1/452.1 + L/2501.83.1/45
HH-A, HH-AS/TP2002.5 + L/3332.2–2.5 + L/2772.2–2.5 + L/2502.2–
HH-A, HH-AS/HP-T, HP-TM2.7 + L/3332.6–2.7 + L/2772.6–2.7 + L/2502.6–
Probe ConfigurationRO,MPL (1)RO,MPL (2)
HP-S-X3C/X51.21.7
HH-A, HH-AS/HP-S-X1S, H1.21.7
HH-A, HH-AS/TP2002.12.7
HH-A, HH-AS/HP-T, HP-TM2.12.7

NOTE: E /E specifications are to be formally understood as E * /E * for the case where non-normal CTE material calibrated test lengths are used.

0, MPE 150, MPE 0,MPE 150,MPE

(1)R referred to DEA GLOBAL 09.xx.08 0,MPL (2)R referred to DEA GLOBAL 12.xx.10 0,MPL

Probe Configuration for performance test: Performance data are valid if the following specification are

  • HP-S-X3C/X5: stylus length 60 mm, tip diameter 5 mm met:
• HP-S-X1S: without extension, stylus length 50 mm, tipTemperature Range18 ÷ 22 °C
diameter 5 mmMax. air temperature variation1 °C/h - 2 °C/24h
• HP-S-X1H: with an extension of 100 mm, stylus lengthMax. air temperature variation1 °C/m
20 mm, tip diameter 5 mm
• TP200: Standard Force Module, stylus length 10 mm, tipTemperature Range16 ÷ 26 °C
diameter 4 mmMax. air temperature variation1 °C/h - 5 °C/24h
• HP-T: Standard Force, stylus length 10 mm, tipMax. air temperature variation1 °C/m
diameter 4 mm
• HP-TM: Standard Force Module, stylus length 10Temperature Range15 ÷ 30 °C (*)
mm, tip diameter 4 mmMax. air temperature variation1 °C/h - 5 °C/24h

Max. air temperature variation 1 °C/m Dynamics:

  • Max. 3D Speed: 866 mm/s (*) Accuracy values under the conditions below are available on
  • Max. 3D Accel.: 4300 mm/s (1400 mm/s with HP-S-X3C/X5) request:

2 2

Max. Scanning Speed : 500 mm/s Temperature Range 15 ÷ 30 °C

Max. air temperature variation 2 °C/h - 10 °C/24h Max. air temperature variation 1 °C/m