Балансировочные машины SCHENCK серии VIRIO 05 - страница 2

Предыдущая страница Следующая страница

Навигация

The variable solution for many balancing tasks

The VIRIO 05 is your fl exible partnervariable drive technology which we
in the workshop and laboratory, inhave developed for this machine.
repair businesses and also for small-The wide measurement speed
series production. The advantage:range of 1,000 to 3,000 rpm provides
It balances even very small diskthe optimum in accuracy and
shaped rotors from 50 grams up toprecision, particularly in the case of
0.5 kg. This is made possible by thediff erent rotors.
Wide rotor range
With the new VIRIO 05, small disk-The machine is compact in design
type rotors without shaft journalswith very good accessibility of all
can be balanced very accurately inoperating and display elements. It
one or optionally two planes. Typicalcomplies with the latest fi ndings in
examples include vertical fans, pumpergonomy and technology.
impellers, compressors, tools or
fl ywheels.
Easy operation due to technical advantages
Balancing is greatly simplifi ed bycalibration runs. By means of the
the permanent calibration: Fit theautomatic angle positioning on
rotor, enter the geometry data, startthe correction points, the VIRIO 05
the measurement run and then carryenables an exact and fast unbalance
out the correction. The unbalancecorrection. The line laser ensures
for one or both correction levels isthe clear display of the correct
displayed after the fi rst measure-angle position.
ment run – without time-consuming
Proven measuring technology
The VIRIO 05 comes complete withCAB 920SmartTouch, the high-end
proven measuring technology in thesolution in terms of operability,
accustomed Schenck top quality inprecision and versatility. This unit
two levels:is easy to operate via touch-screen
CAB 820, the cost effi cient basicfunctions, and is also equipped with
measuring unit for the balancing ofa vectormeter display.
small series or individual rotors.
Technical data
Rotor mass including tooling: max.0,5 kg
Drive power 100 W
Balancing speed approx.: 1000 – 3000 min-1
Distance between correction planes 20 mm
Umar 0,075 gmm
Start-stop time: 5 sec.
Single plane measurement: 0,05 gmm
Rotor diameter max.: 220 mm
Rotor height max.: 150 mm

Balancing and Diagnostic Systems SCHENCK RoTec GmbH Landwehrstrasse 55 64293 Darmstadt www.schenck-rotec.com e-mail: rotec@schenck.net tel.: +49 (0) 6151 - 32 23 11 fax: +49 (0) 6151 - 32 23 15